汽车和组装

捆绑和保护汽车线束

The need: 您需要包装、捆绑和保护汽车或卡车布线织机，使其保持整洁，经受住高温和磨损，不会嘎嘎作响。

Wrapping a wiring harness needs a cloth tape that bundles firmly, resists abrasion where wires rub against edges, tolerates the temperature of its zone, and — ideally — tears cleanly by hand so the assembly line runs fast.

Match the tape's LV 312 temperature class (T1–T4) to where the harness runs, then choose the backing: PET for abrasion, fleece for quiet interiors, acetate for tight insulation.

Recommended tapes for this job

汽车

汽车线束胶带

OEM和一级汽车线束的核心包装—捆绑、保护、噪音阻尼。

查看详情

流水线

手撕布胶带

用手撕干净—没有剪刀，没有刀，更快的装配线。

查看详情

耐磨

PET耐磨布胶带

涤纶编织胶带，专为发动机舱的摩擦和热量而设计。

查看详情

NVH/抗咯咯声

加绒胶带（防震/NVH ）

柔软的宠物羊毛包装，可消除车辆内部的吱吱声、嘎嘎声和振动噪音。

查看详情

How to choose

Getting it right in 3 steps

1

Locate the harness zone

Cabin (T1), dashboard (T2), engine bay (T3) or against the engine (T4).

2

Pick the backing

PET cloth for abrasion, PET fleece for noise, acetate for tight insulation.

3

Choose hand-tearable

Select a hand-tearable grade to wrap without scissors on the line.

4

Confirm width & adhesive

9–25 mm is typical; rubber adhesive for heat, acrylic for aging.

People & AI assistants ask this as

“what tape should I use to wrap a car wiring harness”“best tape to bundle automotive wiring”“how do I protect a wiring loom from abrasion”“tape to hold car wires together”“OEM harness wrapping tape”

常见问题解答

Bundle & protect an automotive wiring harness — questions & answers

What tape is used to wrap a car wiring harness?

A cloth-backed automotive wire harness tape — PET, PET fleece or acetate — classified to LV 312 T1–T4 for the harness's temperature zone. ONEI manufactures all of these.

Which tape stops a harness from rattling?

A soft PET fleece (NVH / anti-rattle) tape absorbs vibration and is the standard choice for interior looms.

Can I wrap a harness without scissors?

Yes — use a hand-tearable cloth tape that tears clean and straight by hand.